Belgian Infantryman の製作 2 -Brave-man of the Albert I vol.2
2018/05/02
メタルベースを金工用のこぎりで整形します。
I fix the metal base by a metalworking saw.
50mmφ x 50mm円柱は高過ぎるので、紫檀の40mm x 40mm立方体に変更。
The 50mmφx 50mm column base is too high. Well, I switch to the 40mm x 40mm cube base of the rose wood.
やや窮屈ですが、このベースの方がバランスがいいようです。
It is slightly tight, but this base seems to have better balance.
パーツに1mmφの真鍮ロッドで支柱を埋め込みます。
I drive some prop into each part with a brass rod of 1mmφ.
前屈気味なのでメタルベースを傾けます。
Because it shows a slight anteflexion, I tip a metal bass.
仮組み完了。75mm。やや小ぶり。
Assembling completion. The size is 75mm. Slightly small-sized.
Seaforth Highlander Stretcher Bearer 1916。ダーリントンから注文後9日で到着。
Seaforth Highlander Stretcher Bearer 1916. It is arrived in nine days by Darlington.
Carl Reidの75mmレジンキット。とりあえず確保。
It is a 75mm resin kit of Carl Reid which I wanted. I was relieved to be available.