待望の一品 3 -Legendary kit 3
車両はMr.ColorのTannで塗装。インスト記載の雲形迷彩にすべきか?
The painting basic in Tann of Mr.Color. Should I make the cloud form camouflage of instructions?シャーシに対してキャビンがズレている。シャーシに接着したエンジンが原因。ラジエターのガイド穴もズレている。
A cabin slips off. This is caused by the engine which adhered to the chassis. The guide hole of the radiator slips off, too.キャビンを垂直にするため、前部のパーツの接着も調整。
Because a cabin is perpendicular, adjustment is necessary for the adhesion of front part parts.何箇所か調整が必要ですが、基本的に正確な設計と思われます。
Several places of adjustment is necessary. But, I seem to be a basically accurate design.側アオリ枠のパーツが一部ショート。ランナー内のパーツ配置がギシギシで湯が回り切らないのでは?
Part of panel frame parts of the carrier is short. The parts placement in the runner is crowded too much?下横枠の根本から切断。プラシート二枚重ねの上に細いシートで折り返しを製作。プラ棒でネジを追加して修正完了。
I cut an insufficient frame. On two pieces of thin plastic sheets, I glue a thinner seat together. I make a lapel. And I add two screw heads of the plastic stick.アオリ枠は若干歪んでるので矯正。荷台上の椅子で6ポンド砲はだいぶ窮屈です。
Because I am warped, the frame revises it. The placement of the 6 pounds gun is narrow by the chair on the carrier.仮組み。パーツの隙間が多く、流し込み接着剤はほぼ使用不可。スチロール樹脂入り接着剤の使用が必須です。
It is temporary assembling. Because there are many gaps of parts, the thin adhesive is unusable. Use of the adhesive with styrene resin is recommended.前部防弾板のステーを前にせり出させたが、水牛みたいになってしまいました。
I pushed it out in front of a bulletproof board stay. But, it has become like a water buffalo!